Skip to main content

Re: [MW:35378] Re: Material Certification 3.1 / 3.2/2.2--EIL India

By Materials & Welding
Dear friend,

EN 10204 3.1 - means - manufacturers issuing certifcate with chemical, mechnical test result by signing Quality engineer & qulaity manager 
EN 10204- 3.2 - means -  Third party agency issuing a certifcate after witnessing the chemical, mechnical test result at manaufacturer place or common lab and signing TPI witnessing  engineer with support of raw materail test certicate with heat number traceabilty.      

Regards,
Sankaran.SP
Welding & Metallurgy expert
Coimbatore, India. 


On Friday 27 December, 2024 at 05:59:44 pm IST, israr <ahmedisrar.nm@gmail.com> wrote:


Hi Team,
Can anybody tell How TPI certify material for 3.2 certification?
Is realy witness required? if Required @ which stage?

On Tuesday, October 8, 2024 at 2:34:35 PM UTC+5:30 israr wrote:
Hi 
Can any body respond at what stage an independent inspector witness material testing for certification of 3.2.?


On Wednesday, December 19, 2018 at 6:03:43 PM UTC+5:30 shaikh ahmed wrote:
Dear Friends,

Please can you advise in which EIL Standard or API standard  to find the material certification requirement  EN3.1 or 3.2 or 2.2 for Pumps ( various components) in EIL Specification.

waiting for your response.

thanks.
Ahmed

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com
.
To view this discussion visit https://groups.google.com/d/msgid/materials-welding/b87c6b60-4658-4cdd-8620-1ba712bdab81n%40googlegroups.com
.

Comments

Post a Comment

Popular posts from this blog

Materails FAQs

By Materials & Welding
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...
21 comments
Read more

[MW:36169] Cold Bending Qualification

By Materials & Welding
Dear Experts,  Can anyone share the inspection requirements or a qualification procedure for cold bending? Our client spec states only the requirements for induction bending and would like to know your opinion on the cold bend inspection requirements. The code of construction is B31.3, Max. 5D bends, A106 SS 316L.  Thanks in Advance. -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion visit https://groups.google.com/d/msgid/materials-welding/1be61cc3-e9c9-4a5f-834d-e8485e248432n%40googlegroups.com .
Post a Comment
Read more

[MW:30043] Weep hole

By Materials & Welding
If weep hole is not provided in dummy pipe before welding What will happen??? -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/da251ee6-fa7f-4851-b876-cdb3834ae341%40googlegroups.com .
Post a Comment
Read more