yes, Maximum to be welded because test coupen thickness is 40mm
On Fri, Nov 24, 2023, 5:28 PM SANJAY SINGH <sanjay.kharwar349@gmail.com> wrote:
Dear One and All ,--Please let me know QW 202 .2 b actual interpretation for partial penetration .I have WPS with Base metal thickness of 40 mm then whether it qualifies for partial weld groove above 200 mm Thk. base metal thickness also .RegardsSanjay
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALkBf%2Bvnq_Vf5cGmGMoLe99grjVwvGZt%2BvRUxip50bgitDHtDQ%40mail.gmail.com.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4ePgNPn4Q%2BzUhZf%3DAxhBA41ZqX1NJ4xDDC7QPFMBgWV-MQ%40mail.gmail.com.
No comments:
Post a Comment