Re: [MW:34641] Interpretation QW202.2 b

40 mm PQR test coupon 

Then there is no limit for partial penetration groove welding  base metal thickness limitation

Sent from my iPhone

On 24-Nov-2023, at 5:28 PM, SANJAY SINGH <sanjay.kharwar349@gmail.com> wrote:



Dear One and All ,

               Please let me know QW 202 .2 b  actual interpretation  for partial penetration .

I have WPS  with Base metal thickness of 40 mm then whether it qualifies for partial weld groove above 200 mm Thk. base metal thickness also .

<image.png>

Regards 

Sanjay 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALkBf%2Bvnq_Vf5cGmGMoLe99grjVwvGZt%2BvRUxip50bgitDHtDQ%40mail.gmail.com.