Re: [MW:35152] Tolerances for Fillet weld Sizes as per ASME.

ASME is silent in fillet weld. Design has to decide tolerance. Generally negative side not acceptable.positive side ok.

On Thu, 1 Aug 2024, 3:05 pm Shivasankar A, <shivasankar2593@gmail.com> wrote:

Hi Guys hope you all doing Good.

I need a clear idea about the Tolerances for Fillet Weld Size.

If my Fillet weld Size as per Drawing is 10mm. What will be the Tolerances.

Tell me the Exact location of this Tolerances given in the ASME.

Thanks in advance.

Regards,

A.Shivasankar 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/04774b1c-819d-48fd-95f8-7d21b3c6419dn%40googlegroups.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAEabyKmHdQa4N%2B%2BMisRf2sUNmS4h9JHh%2BCr4Kv39P_BF55LDAQ%40mail.gmail.com.