Wednesday, January 31, 2018

[MW:27305] What is the allowable inner penetration during pipe wedling

Dear Experts,

During pipe to pipe welding by single V butt joint by GTAW process (example : 1" XXS P91 pipe), there is a weld reinforcement over the groove and maintained 2 to3 mm of height, such a way ID penetration is also there. How much of height ID penetration is allowed? which is to be checked by RT exam. Kindly clarify and give me any supporting/ document  reference.

Regards, 

Sankaran.SP
Welding & Metallurgy expert
Coimbatore, India
By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:35668] Selection of Filler/Electrode.

Dear Gentlemen, Kindly advise me as we have tube to tubesheet joint. Tube moc is incoloy 800 And tubesheet moc is F53 SDSS (Super duplex sta...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...