Wednesday, April 29, 2009

[MW:2065] Re: Tube bending

1D Bending can be done by squeezing and 10% thinning can be achieved.

Regards
T.Selvakumar

--- On Wed, 29/4/09, Ravinder Sharma <ravi.achit@gmail.com> wrote:

From: Ravinder Sharma <ravi.achit@gmail.com>
Subject: [MW:2052] Tube bending
To: "Materials & Welding" <materials-welding@googlegroups.com>
Date: Wednesday, 29 April, 2009, 12:04 PM


How can we do 1D radius bending on 38 OD tubes. with max. ovality of
10% and 15 % thining?

Cricket on your mind? Visit the ultimate cricket website. Enter now! --~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:35686] HDPE WPS

Refer ASME SEC IX  There is separate chapter for Plastic welding . Based on that you have to prepare  Sent from my iPhone On 21 Jun 2025, at...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...