Materials & Welding

Dear Perumal, I answer the same but got one more question where it is written that TPI witness is mandatory? -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion visit https://groups.google.com/d/msgid/materials-welding/5327ca5e-5b05-4581-9ee6-833fee126474n%40googlegroups.com .

Corrosion Rate required based on the process fluid, Client has to provide On Monday, December 2, 2024 at 3:39:50 PM UTC+5:30 Vivek wrote: Team, This is regarding material UNS N06022. The corrosion Test is carried out as per ASTM G28 Method A. The test result is  37.762 mpy (0.9592 mm/year). May I know which standard provides acceptance criteria (range) for corrosion rate? Regards, Vivek -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion visit https://groups.google.com/d/msgid/materials-welding/d52f1938-345e-41a5-86a6-e82eefd10f18n%40googlegroups.com .

Hi Team, Can anybody tell How TPI certify material for 3.2 certification? Is realy witness required? if Required @ which stage? On Tuesday, October 8, 2024 at 2:34:35 PM UTC+5:30 israr wrote: Hi  Can any body respond at what stage an independent inspector witness material testing for certification of 3.2.? On Wednesday, December 19, 2018 at 6:03:43 PM UTC+5:30 shaikh ahmed wrote: Dear Friends, Please can you advise in which EIL Standard or API standard  to find the material certification requirement  EN3.1 or 3.2 or 2.2 for Pumps ( various components) in EIL Specification. waiting for your response. thanks. Ahmed -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussio...

Refer BS EN 10204, note  TPI from purchaser On Fri, 27 Dec 2024, 16:29 israr, < ahmedisrar.nm@gmail.com > wrote: Hi Team, Can anybody tell How TPI certify material for 3.2 certification? Is realy witness required? if Required @ which stage? On Tuesday, October 8, 2024 at 2:34:35 PM UTC+5:30 israr wrote: Hi  Can any body respond at what stage an independent inspector witness material testing for certification of 3.2.? On Wednesday, December 19, 2018 at 6:03:43 PM UTC+5:30 shaikh ahmed wrote: Dear Friends, Please can you advise in which EIL Standard or API standard  to find the material certification requirement  EN3.1 or 3.2 or 2.2 for Pumps ( various components) in EIL Specification. waiting for your response. thanks. Ahmed -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and st...

Dear friend, EN 10204 3.1 - means - manufacturers issuing certifcate with chemical, mechnical test result by signing Quality engineer & qulaity manager  EN 10204- 3.2 - means -  Third party agency  issuing a certifcate after witnessing the chemical, mechnical test result at manaufacturer place or common lab and signing TPI witnessing  engineer with support of raw materail test certicate with heat number traceabilty.        Regards, Sankaran.SP Welding & Metallurgy expert Coimbatore, India.  On Friday 27 December, 2024 at 05:59:44 pm IST, israr <ahmedisrar.nm@gmail.com> wrote: Hi Team, Can anybody tell How TPI certify material for 3.2 certification? Is realy witness required? if Required @ which stage? O...

How to select sample size for mechanical testing for different material (casting , rolled plate forging) -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion visit https://groups.google.com/d/msgid/materials-welding/CAJDZhX8Hw7vp3C89JM_%2BV8vqTziKrHVjhNg_ZPytTZnY-vTzfA%40mail.gmail.com .

dear sir, for casting & forging- standard test bar is enough for conducting mechanical testing  for plate - we can take mechanical test sepecimen size as per ASME sec IX sample picture    Regards, Sankaran.SP Welding & Metallurgy expert Coimbatore, India.  On Saturday 28 December, 2024 at 11:14:09 pm IST, Chandrapal Singh <avioraio@gmail.com> wrote: How to select sample size for mechanical testing for different material (casting , rolled plate forging) -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an ...

Dear Team, Can anybody suggest for below detail required to fill in MDR of U Stamp Pressure Vessel. Abbreviations used:  NA-Not applicable, MOC-Material of construction, DOE-Degree of examination, RT-Radiographic test,  H.T - Heat Treatment  All Dimensions are in mm, Pressure in Psi(g) (MPa(g)) & Temperature in °F  (°C). Hydrotest position is Vertical.   Note 1- Nozzle to Shell / Head attachment weld with R.F.Pad as per Fig. UW-16.1(C-1), category 'D',Type No.7, DOE-Visual, RT-None, Joint efficiency-NA Note 2-Nozzle to Head attachment weld with R.F.Pad & intrnal projection as per Fig. UW-16.1(c-1), category 'D', Type No.7,  DOE-Visual, RT-None, Joint efficiency-NA ...

Dear Israr,  The following details are necessary to be included in the "Remarks" section when preparing the Manufacturer's Data Report (MDR) for a U Stamp Pressure Vessel. Below is an interpretation and a list of suggestions based on the provided information: Suggestions and Notes: 1. Abbreviations: Ensure abbreviations (e.g., NA, MOC, DOE, etc.) are clearly defined in the MDR for better comprehension by reviewers and inspectors. 2. Hydrotest: Specify that the hydrotest position is vertical and include this detail explicitly in the MDR under the "Hydrostatic Test Details" section. 3. Nozzle and Weld Details: Incorporate the weld details (e.g., Category, Type, DOE, RT, and Joint Efficiency) from Notes (1 to 7) into the respective nozzle information sections of the MDR. Ensure visual examination (DOE) records are properly documented and included. 4. Corrosive Service: Document compliance with UG-46(f)(3) and UG-46(g)(1) for inspection openings. C...