Skip to main content

[MW:618] Online Engineering Calculators (Mechanical/ Civil/ Mettalurgy/ Unit Conversion, etc.) & other Technical sites

By Materials & Welding

Online Engineering Calculators (Mechanical/ Civil/ Mettalurgy/ Unit Conversion, etc.) & other Technical sites

 

 

Please visit www.calculatoredge.com & www.mycalculations.com an online tool for Electrical, Electronics, Mechanical, Civil, Chemical Engineers, it has hundreds of equations and formula, its all FREE.

 

Following are the good technical sites:

 

Description

SITE

ENG NET

http://www.engnetglobal.com/

ESB Consultancy

http://www.esbconsult.com/

International protective coating

http://www.international-pc.com/pc/

ENGINEERING POWER TOOLS

www.pwr-tools.com

SHELL E-SPIR

www.e-spir.shell.com

Web-based Engineering Calculations & Graphics

www.mycalculationS.com

 Steel Guide

www.key-to-steel.com

 

www.techstreet.com

My calculators

www.mycalculations.com

 

http://www.engineeringtoolbox.com/

Cambridge university

http://www.msm.cam.ac.uk/phase-trans/index.html

Fabrication technology

http://www.fabtech.in/FabPortal/

A CORROSION AND MATERIALS TECHNOLOGY SITE
THE HENDRIX GROUP

http://hghouston.com/index.html

Browse Lots of Engineering Books, Free for Download

www.artikel-software.com

Online tool for Electrical, Electronics, Mechanical, Civil, Chemical Engineers, it has hundreds of equations and formula, its all FREE.

www.calculatoredge.com

Engineering Tips Forums

www.eng-tips.com

 

Materials & Metallurgy (Mills)

 

arcelormittal

www.arcelormittal.com/

Avesta

 

Corus

www.corusgroup.com/en/

dillinger

www.dillinger.de/dh/index.shtml.en

JFE Steel - Japan

www.jfe-steel.co.jp/en/

Mannesmann

www.mannesmann.com

Otokumpu

www.outokumpu.com

Posco

http://www.posco.co.kr/homepage/docs/en/s91a0010001i.jsp

sandvik

www.smt.sandvik.com

Industeel

www.industeel.info/

 

 

Note:

If any members have some more useful technical sites, may please share…

 

Best regards,

 

Sunil S. Agrawal

Engineering & Design Tecnimont ICB


--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
-~----------~----~----~----~------~----~------~--~---

Comments

Post a Comment

Popular posts from this blog

Materails FAQs

By Materials & Welding
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...
21 comments
Read more

Heat tint (temper) colours on stainless steel surfaces heated in air // Heat tint

By Materials & Welding
Introduction The colour formed when stainless steel is heated, either in a furnace application or in the heat affected zone of welds, is dependent on several factors that are related to the oxidation resistance of the steel. The heat tint or temper colour formed is caused by the progressive thickening of the surface oxide layer and so, as temperature is increased, the colours change.   Oxidation resistance of stainless steels However, there are several factors that affect the degree of colour change and so there is no a single table of colour and temperature that represents all cases. The colours formed can only be used as an indication of the temperature to which the steel has been heated. Factors affecting the heat tint colours formed Steel composition The chromium content is the most important single factor affecting oxidation resistance. The higher the chromium, the more heat resistant the steel and so the development of the heat tint colou...
Post a Comment
Read more

Re: [MW:10788] ON PLOT PIPING & OFF PLOT PIPING

By Materials & Welding
Piping systems involved for the flow lines and gathering lines from the well head isolation valve to the production facility or processing plant isolation valve are determined as OFF PLOT. ON PLOT defines piping system in the processing plant and production platform. ANSI/ASME B31.4 applies for off plot piping system. B31.4 allows the use of either API 1104 or ASME section IX (as appropriate). However, occasionally, a very small system such as piping within 500 feet of a processing plant (some client also said 400 feet) may be declared B31.3 rather than B31.4. When B31.3 is invoked, only ASME Section IX is used. before you decide which code to use for welding procedure and/or welder qualification for pipe welding, you have to know the design and construction code applicable to the system. Please read far enough into scope and diagram illustrating the application of either B31.3 and B31.4 hope this helps rgds 2011/4/21 pradip kumar sil < pradipsil@gmail.com > Dear all, ...
Post a Comment
Read more