Thursday, January 20, 2011

[MW:9352] Penetrameter DIN 54109

Dear All

Which one of the penetrameter is more stringent  DIN 10/16 or DIN 6/12? Actually as per the requirement DIN 6/12 should have been used for 6'' SCH 160 carbon steel pipe but they have used DIN Fe 10/16. I think it should be acceptable if the DIN 10/16 is used for thinner materials than  6'' SCH 160 carbon steel. A table in this regard would be helpful.

best regards

To post to this group, send email to
To unsubscribe from this group, send email to
For more options, visit this group's bolg at
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:26652] ASME Tack welder Qualification

You are wrong. When Asme is applicable and wenn tack welds are to be removed no need for qualification  Sent from my Samsung Galaxy smartpho...