Monday, April 17, 2017

Re: [MW:26433] Radiography requirement of Annular Plate butt welded joint of the Tank / API 653/650

Dear Prasad

Thanks for the response. However, I understand that Section 8.1.2.9 does not refer to RT requirements for Group 1 materials. In that case RT won't be required for butt welded Annular Plate I believe. 


Thanks and Regards 
Vino 
Qatar 




On 16/04/2017 9:29 AM, "Prasad Rode" <purode333@gmail.com> wrote:
Ans1) yes, spot radiography is required with 50% on radial joints.
2) pls check appendix U for the same.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/7b98fc88-8322-40ea-8ec1-92e8a245b299%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAM7oz7CpZDQihiwGYs0FjtOym6s%2BvqUr6MOmeog2DmRL5dOYPg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...