Saturday, April 15, 2017

Re: [MW:26419] Welding of copper alloy E-CuAl-A2

Dear friend,

Tray to pre cleaning for surface of work piece before welding. Can you tray the same welding process on new sample of carbon steel (separate one new one) . Tray it may be surface have contamination making this porosity .

Keep in contact 
M.elsahhar
QA/QC Engineer
002 01220 938021

On Apr 14, 2017 2:25 PM, "Amit Mavai" <mavai2003@gmail.com> wrote:
Good Morning All.
 Dear all i have a quarry regarding weld overlay of brass on on carbon steel.
I did the weld overlay of E-CuAl A2 electrode on carbon steel forging by process SMAW. As the electrode used was 3.15mm , all the parameters were set i.e current was 110Amp & voltage was 22, travel speed was normal.
After welding i faced a problem that i found huge porosity in the weld bead after grind. I tried all the efforts to remove the porosity but it fails to find the root cause.
So this is request to all of you kindly suggest me for smooth and fine weld.
 

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/bd963d8b-ccf4-4568-a6e4-116b01a83562%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CADGm7%3Dx12mZXVxfW6NnJn9Savop2ZU6KXO6HBtHsa7%3D0upt1uQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...