Monday, April 17, 2017

[MW:26435] FW: 26424] recommended filler Wire for hastelloy D-205 to Alloy-20 Weld

Hi Brajendra,

 

According to Matweb, Haynes has discontinued his product. Hence very little information is available in the web. Feel free to share the OEM's specifications or data sheet for better clarity of the  problem.

 

Between these 2 alloys, D-205 is more austenitic, containing more Nickel. Hence recommended welding filler for this alloy should be default choice for welding between these 2 alloys.

 

Thanks.

 

 

P.Goswami.P.Eng, IWE.

Welding & Metallurgical Specialist

Linkedin: https://www.linkedin.com/in/pradip-goswami-2999855/

Email:pgoswami@quickclic.net,pradip.goswami@gmail.com

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Brajendra Singh
Sent: April 16, 2017 1:01 AM
To: materials-welding@googlegroups.com
Subject: [MW:26424] recommended filler Wire for hastelloy D-205 to Alloy-20 Weld

 

Dear Experts,

 

Need your expert advice on following subject matter.

 

Attaching herewith the chemical composition of hastelloy D-205 &  Alloy-20(UNS N08020)

 

We want to seal weld between these dissimilar metal  for elimination of leakage.

 

Kindly suggest recommended filler Wire & weld parameter for the same.

 

 

Thanks & regards,

Brajendra Patel

Cont:+917057406907


--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CA%2Bi%2BCirf9wVr4kKJ_bQ38Un1Sg1s8my387XU%3Ddqfg0rFQpcuFQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.




AVG logo

This email has been checked for viruses by AVG antivirus software.
www.avg.com


No comments:

[MW:34916] Applicability of Impact requirement as per ASME B31.3

Dear All, Design code – ASME B31.3, Welding Code- ASME BPVC SEC IX Material  to be used used during Fabrication - SA 333Gr6 (P No.1 G...