Thursday, March 9, 2017

Re: [MW:26175] Fwd: Welder qualifications

Yes



Sent from my Samsung Galaxy smartphone.

-------- Original message --------
From: materials-welding@googlegroups.com
Date: 09/03/2017 14:46 (GMT+03:00)
To: materials-welding@googlegroups.com
Subject: [MW:26173] Fwd: Welder qualifications

Dear All,
Pl clarify trailing mail
---------- Forwarded message ----------
From: chiluka venkatramulu <ramuluchiluka@gmail.com>
Date: Thu, Mar 9, 2017 at 4:54 PM
Subject: Welder qualifications
To: materials-welding <materials-welding@googlegroup.com>


Dear all,
When we qualify welder for performance qualification by NDT we need to take RT-150mm. My quarry is, if we need to qualify 1/2" pipe for diameter qualification, whether we need to weld 3 piece to take RT of 150mm.


Ragards,
Venkatramulu
 

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAF98%2BdHDDs0y0UrtD3xvRLpHhwLZ-bw1zz3W%3DJ%3DP5EWeiwGRBQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...