Wednesday, March 8, 2017

Re: [MW:26169] GMAW- Spray transfer Lack of Side Wall fusion in FPW welds

What is current &voltage

On 08-Mar-2017 7:06 PM, "MW" <raghurambathula@gmail.com> wrote:
I have a technical issue with GMAW- Spray transfer process. The wire is 1.2 mm dia. The joint configuration is single bevel butt joint. The weld defect is mostly Lack of Side Wall fusion. The member thickness is 12 mm. All the welds have back chipping and welding. I suggested employing stringer bead technique to improve side wall fusion. But unfortunately, many of the joints are getting rejected in Ut testing. Kindly suggest some techniques/remedy for this problem. Looking forward to your positive feedback. 

Regards, 

Binoj Nair

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/deb6536a-6834-489f-8f90-80700a42854d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4ePEFoOJsFSW3ho5Wa1Skw%2BpW6opsM%3D4dG1GrKa%2BvFG4sA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...