Friday, February 17, 2017

Re: [MW:26091] welding positionpp

Dear
I have attached the photos showing position of joint
Regards
Umar Daraz Khan

On Feb 15, 2017 3:19 PM, "VISHNUDAS MAVUNKASHERY" <36vishnudas@gmail.com> wrote:
attaching a photo of joint will b appreciated


On Mon, Feb 13, 2017 at 8:28 PM, Aslam Khan <aslamkhan4u@gmail.com> wrote:
Dear experts,
I have to weld one plate which is on the top of shell plate which is fillet joint,
Which welding position we have to choose 4 G or 4 F, 
2nd it is not completely 4F,  it is like 3 F.

your quick response will be highly appreciated.

Regards
aslam

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAA68Awkw8NL%2BacUp547wN4vPtBKuOr%2B18dmeVYD0zpBEfPWT7A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.



--
VISHNUDAS MURALI MAVUNKASHERY

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAK8EmDQQRo5JvoFBkNiXf8g5CysjAa2Sd-4g2V4wJZiuFW%3Da7A%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJScQE48G3ajbP%3Dn%3D0LepapmBRJb_RVQ1MuV4_5jgMVNKeQHFg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...