E 6013 electrode was primarily designed to provide good wetting and shallow penetration for thin sheet metal applications and E7018 provides medium penetration
On Sun, Oct 30, 2016 at 5:34 AM, Prasad Rode <purode333@gmail.com> wrote:
Dear sir,
As per API 650, above 12mm E7018 has to be use. Means up to 12mm E6013 has to use.
I have only query to ask that, why e6013 not allow to use above 12mm.
Regards
Prasad
--
http://www.linkedin.com/groups/MaterialsWelding- 122787?home=&gid=122787&trk= anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com .
To post to this group, send email to materials-welding@googlegroups.com .
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/ .9d470b07-b7e7-4fd5-a607- 4a65202d869e%40googlegroups. com
For more options, visit https://groups.google.com/d/optout .
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALwNT%2B-TGn2rSSuAcJcjVd5hVEzAVVU_yzF8Uv18d5NBBGsXHA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment