Thursday, February 9, 2017

Re: [MW:26025] Regarding the welding consumable for the joint on Saddle(or Support lug) to Reinforced pad

ASME B-31.1 Para 127.2

On Thu, Feb 9, 2017 at 9:06 AM, Manager Kim <junghwan0808@gmail.com> wrote:
Dear Mr. Prasad,

Thanks for your advice.
Could you please let me know which paragraph can I refer to welding of dissimilar material in ASME Code?
It would be highly appreciated to me.

Best regards,

Kim, Junghwan / Project Manager in DKME

2017-02-08 23:26 GMT+09:00 Prasad Rode <purode333@gmail.com>:
Dear air,

As per code, in case of welding of dissimilar material, consumable of lower grade material can be used to weld it.

So, in your case, consumable of P1 material can be used.

Regards
Prasad

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/d9535442-b1fd-42df-9843-0226b4792d01%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAMS8U9AgHe5%2BQBkH%2BPcyz-E6ogmY%2BzWHuW3SXOEyFAzuScsd_Q%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAB%3DAs8%3D6O9mcfS6RzEcyV8GTOVr9GYARe2XDRsS%2Br1YQaEH_5Q%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...