Dear Experts,
yes Mr. Muthu you are right and for CS the ppm is between 250 - 300 ppm.
Thanks,
Bala
On 10/25/16, muthu barathi <muthu_barathi@rediffmail.com> wrote:
>
>
> Dear Sir,
>
> PH9 ok. But 25ppm is normally recommended for SS piping. For CS it could be
> in between 250 to 300 ppm and it could be found from your Project
> Specifications.
>
>
>
> Thanking you.
> With Regards,
> Muthu Barathi P. , Mobile number : 8469593553
>
>
>
>
> From: dilintas <dilintas@gmail.com>
> Sent: Tue, 25 Oct 2016 09:48:25
> To: Meghanadh K <materials-welding@googlegroups.com>
> Subject: Re: [MW:25587] Hydro test water quality for carbon steel.
>
> PH 9Clorines 25 ppm
>
>
> Sent from my Samsung Galaxy smartphone.
> -------- Original message --------From: Krisanu Bhunia
> <krisanu.bunty@gmail.com> Date: 23/10/2016 06:41 (GMT+02:00) To:
> materials-welding@googlegroups.com Subject: [MW:25585] Hydro test water
> quality for carbon steel.
>
> Dear Expats,Please give information about hydro test water quality PH value
> and PPM limits for carbon steel and please give ref. code.regardskrisanu
>
>
>
>
> --
>
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>
> ---
>
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
>
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-welding+unsubscribe@googlegroups.com.
>
> To post to this group, send email to materials-welding@googlegroups.com.
>
> To view this discussion on the web visit
> https:roups.google.com/d/msgid/materials-welding/CAMZth3pPmGZvTfht7nw59SkHiBtSSB4ZHaAvyA1KjFOO6T4=1Q@mail.gmail.com.
>
> For more options, visit https://groups.google.com/d/optout.
>
>
>
>
>
> --
>
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>
> ---
>
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
>
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-welding+unsubscribe@googlegroups.com.
>
> To post to this group, send email to materials-welding@googlegroups.com.
>
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/materials-welding/7lrwsm68fwhdk8jmitdcvcp1.1477236698214@email.android.com.
>
> For more options, visit https://groups.google.com/d/optout.
>
> --
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
> ---
> You received this message because you are subscribed to the Google Groups
> "Materials & Welding" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to materials-welding+unsubscribe@googlegroups.com.
> To post to this group, send email to materials-welding@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/materials-welding/1477376378.S.38346.autosave.drafts.1477376539.24384%40webmail.rediffmail.com.
> For more options, visit https://groups.google.com/d/optout.
>
--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAL9C6DZjwbtZqXRcSSVgdv-PmdFg02oygy51nEzwJxyGgYsgtw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
Subscribe to:
Post Comments (Atom)
[MW:34866] Presentation for WPS ,PQR AND WPQ as per ASME Sec IX in power point
Dear Experts. If anyone having presentation of WPS,PQR and WPQ as per ASME SEC.IX in power point then please share . Regards Sanja...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment