Friday, October 7, 2016

[MW:25506] One interviewer asked

Dears,

Good day.

One interviewer asked.

First question,

There is Two pipe Joint ready to inspection. one is 48 inch dia pipe with flange, other one is 8 inch pipe dia pipe with flange. both are same carbon steel. so what is the role of qc inspector for inspection ?

Second question,

There is Two pipe Joint ready to inspection. one is 48 inch dia static equipment (like column or vessels)  with flange, other one is 8 inch pipe dia static equipment (like column ,or vessels) with flange. both are same carbon steel. so what is the role of qc inspector for inspection ?

Please answer...

Thanks in advance..

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAFoQ_ncNzeRf87WejKyANWUDfyCCcu_y6HiLjZt2zqsEpC%3DUNg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...