Sunday, September 18, 2016

Re: [MW:25418] UT/RT

You must eliminate the possibility of HIC in joints ( cracks could appear after cooling of Heat treatment has been completed that is the need of waiting 48 h )Specialy in hight tickness (up 20mm)


For Contractors is mandatory Visual inspection in all Codes

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/c9fe905b-8757-4c21-8c43-9d25c5ce6f50%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...