Sunday, September 11, 2016

Re: [MW:25370] Saw Welding pokemarks.

Hi!
Some time you req to bake flux at higher temp of 350c with bed height less than 50mm
Iij) during weldng flux bed height should not be excesive
Iii) check the flux grain size distribution
Regards
Hegde


From: Dinesh Somwanshi <som.din@gmail.com>;
To: materials-welding <materials-welding@googlegroups.com>;
Subject: [MW:25369] Saw Welding pokemarks.
Sent: Sun, Sep 11, 2016 12:49:43 PM

Dear sir,

We are observing an pokemarks on Saw welding weld bead continuously.

The flux has used by baking.

Pls guide.

Dinesh V Somwanshi
Api 570, Cswip 3.1,Bgas 2
Authorised Certified Piping, Welding, Painting Inspector.
00919881344135

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAELgRrV4EZNPkvz-JBo28_a39f9k3T-tXf07YFRGEjFL%2BqrxLQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/1473603449.45722.YahooMailMobile%40web192706.mail.sg3.yahoo.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

[MW:34866] Presentation for WPS ,PQR AND WPQ as per ASME Sec IX in power point

Dear Experts.        If anyone having presentation of WPS,PQR and WPQ  as per ASME  SEC.IX  in power point then please share . Regards Sanja...