Thursday, July 28, 2016

Re: [MW:25156] Re: Tack welder qualification

...if they remain in place...

Sent from my BlackBerry 10 smartphone.
From: anthony chundal
Sent: Πέμπτη, 28 Ιουλίου 2016 - 13:04
To: Materials & Welding
Reply To: materials-welding@googlegroups.com
Subject: [MW:25155] Re: Tack welder qualification


Dear Sam,

As per ASME Sec VIII-Div-1, UW-31(c), tack welders need to be qualified.

Regards,
Anthony.


On Tuesday, December 13, 2011 at 8:48:37 PM UTC+4, samshuddin k wrote:
Dear Experts
There is any clause in ASME Sec. IX for tack welder qualification.
Which Code explains tack welder qualification for piping
regards
Samshuddin.K

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/cc0d08ba-e64a-49a5-9402-5354a48c9a48%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...