Tuesday, October 29, 2013

Re: [MW:19119] Buckling in the outer edge of the bottom plate.

Dear Mr VIN
                 
 
You control during welding and follow the welding sequence.For bottom first alternate short seam and alternate long seam.finally closing seam. API 650 minimise the buckling.

 
 
With regards
 
 
 

From: Mervin <mervin_kid@yahoo.com>
To: materials-welding@googlegroups.com
Sent: Tuesday, October 29, 2013 10:54 AM
Subject: [MW:19101] Buckling in the outer edge of the bottom plate.

Dear experts,

Can you give me some refererence standard in API-650 about the acceptable buckling of bottom plate&shell plate. Because in our project we encounter after the welding of bottom plate is buckling around 2".

My question is how to do remidial of this buckling.

Vin

Sent from my iPhone

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...