Thursday, October 17, 2013

RE: [MW:18970] Welding Repair Procedure for A312TP316H

Dear Ramin,

 

 

The Coil is designed for dry run at 550 deg C.

 

Shell : Waste Gas from Gas turbine Generator

 

Tube Side : Therm 66

 

 

Regards

 

Siva

 

Asset Integrity Lead

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Ramin Kondori
Sent: Monday, October 14, 2013 11:18 PM
To: materials-welding@googlegroups.com
Subject: Re: [MW:18938] Welding Repair Procedure for A312TP316H

 

Dear Sivaselva:

Our friend Octane is probably right but what are design and service requirements...?

(Design temp, Corrosive media, requirements for mechanical properties etc.)

 

Regards

Ramin Kondori

Sr. QA/QC Engineer

SINOPEC

r.kondori@petroyada.com
+98-2123592322
+98-9132150320

 

On Sun, Oct 13, 2013 at 9:19 PM, Octane Mac <octane.mac@gmail.com> wrote:

You need to use E16-8-2 welding consumable. No preheat, maximum interpass needs to be 175 C and no PWHT.

 

Octane

 

On Sun, Oct 13, 2013 at 9:34 AM, Sivaselvam Ponandrum <sivaselvam@kpoc.com.my> wrote:

Dear Sir,

 

Please provide Welding Repair Procedure for A312TP316H since this material has high carbon content.

 

 

The above material is used as tube material in the WHRU (Waste Heat Recovery Unit).

 

 

Regards

 

Siva

 

 

 


To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.



DISCLAIMER:
This e-mail and any files transmitted with it ("Message") is intended only for the use of the recipient(s) named above and may contain confidential information or otherwise protected from disclosure. You are hereby notified that the taking of any action in reliance upon, or any review, retransmission, dissemination, distribution, printing or copying of this Message or any part thereof by anyone other than the intended recipient(s) is strictly prohibited. If you have received this Message in error, please delete this Message immediately and advise the sender by return e-mail. Opinions, conclusions and other information in this Message that do not relate to the official business of the Company shall be understood as neither given nor endorsed by the Company. Please be aware that the contents of this e-mail may not be secure, and should not be seen as forming a legally binding contract unless subsequently confirmed in writing by the Company.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...