Hi Vinu,
You may wish refer to the Client’s specifications first before seeking a concession from RT to UT
If there is restricted access for RT to be carried out which you have to prove it, I believe the client may accept your proposal
Thank you
Best Regards
David Chan
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Vinu Raveendran
Sent: Wednesday, October 16, 2013 4:00 AM
To: materials-welding@googlegroups.com
Subject: [MW:18956] UT for RT as per AWS D1.1 or ASME SEC V
Dear Experts,
We are fabricating steel encapsulations for Dolphin Structures. Material is EH36.
Client has proposed for 10%RT for butt joints. Can I propose for 10% UT instead for RT as per AWS D1.1 or ASME SECV.
Requesting for extact reference from codes.
Thanks in advance
--
VINU RAVEENDRAN
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment