Sunday, October 13, 2013

Re: [MW:18935] storage tank hydrotest with sea water.

I think there is no mention in API 650 about sea water for hydrotest 
However, I remember that a 500ppm TDS and less is required with some neutral PH
Use of salty water, if no choice, requires specific flashing with fresh water after test completion
BR

Sent from my iPad

On Oct 12, 2013, at 20:27, Manoj John <manojacgnr@gmail.com> wrote:

Dear members,

Please share information and procedure for hydrostatic testing of API storage tank with sea water.

Thanks in advance,
Manoj.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...