Re: [MW:18903] Partially Claded Reactor Inside dia

Dear

In this case the equipment volume is the matter, if the designer considers volume of the vessel is not effecting then we can proceed without cladding id.

On Wed, Oct 9, 2013 at 12:59 PM, Mohamed <basheerudma@gmail.com> wrote:

For Partially Claded Reactor

Whether we have to consider 

1) Base metal ID of cladded portion as Reactor inside ID or

2) Flushed finished ID

< Query from vendor - For reference >

One vendor considered as below

We have considered base metal ID of cladded portion as

XXXX mm as mentioned in Equipment datasheet.

Request you to confirm that this is base metal ID only & not finished ID.

< Request>

Can any one provide reference drawing for Partially Claded Reactor for better understanding

Expecting reply  09 th Oct 2013

Cheers

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.