Simple answer is yes.
Tony Rudder
QA/QC Manager
Irwin Industries
Direct: 310-233-3044
Cell: 310-629-2629
Email-arudder@irwinindustries.com
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Lalu r p
Sent: Friday, October 04, 2013 2:27 AM
To: materials-welding@googlegroups.com
Subject: [MW:18845] Welder Qualification for Hot-Tapping
Dear Experts,
We have a Hot-tapping Job of 2" set-on branch on 42" & 24" Run pipe. Code of construction is B31.3 AND material is SS 321. But our welders are ONLY qualified in GTAW+SMAW. So We need to prepare new WPS and conduct PQR, but my doubt is it mandatory to qualify the welders in SMAW on 2" pipe for this job.Please advise.
Thanks & Regards
LALU R.P
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment