Re: [MW:17438] E 7018 used instead of E7018-1

Dear

 

Qualify Welding procedure with E7018 and carry out tensile, bend & impact testing...if all tests are OK you can convince your Client those weld joints are meeting requirement of impact properties.....

 

 

 

Ali

On Sun, Apr 14, 2013 at 2:11 PM, Binu Nair <binugnair1984@gmail.com> wrote:

Dear Experts,

 

Our welders are used E7018 instead of 7018-1 for A333 Gr-6.

Now client is asking to cut the joints.

Moreover they are asking to prove the remaining joints whether they are welded with 7018-1 or not.

Can anybody suggest a suitable method such as any NDT to prove that ?

So please send your valuable suggestion with reference to code.

 

Thanks & regards,

 

Binu.

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.