Re: [MW:16890] Rt review

GTAW means slag??? not necessarily.... If you use GTX category wires/rods, whose cored wire is filled with flux, whose burning also produce slag. ವಂದನೆಗಳೊಂದಿಗೆ / Best regards, Nandesh Kumar A Abu Dhabi, UAE P.S. : Please don't print this e-mail unless you really need to. --- On Wed, 27/2/13, sreenivas kakkoth <sreenivaskakkoth@gmail.com> wrote: From: sreenivas kakkoth <sreenivaskakkoth@gmail.com> Subject: Re: [MW:16885] Rt review To: materials-welding@googlegroups.com Date: Wednesday, 27 February, 2013, 8:11 AM Dear Abhilash, If you find any slag inclusion while review of RT film, then you can conclude that the welding process was done as SMAW sandwiched between TIG. Because slag inclusion occur in SMAW not in TIG process With Best Regards, Sreenivas Kakkoth +212650812266 On Sat, Feb 23, 2013 at 10:10 PM, abhilash <abhilash.jaa@gmail.com> wrote: Dear experts:                          I need to know that during the review of rt film is it possible to identify two diffrent process.ie root by tig upto fill up smaw and then again capping is done by tig . -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm   The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.     -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm   The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.