Wednesday, February 27, 2013

Re: [MW:16886] PMI on Stainless Steel Welds

Hi
 
PMI test for SS and Alloy steel is client requirement and same is mentioned in QAP / project specs..
It is not code requirement.
 
Regards
 
Prem Nautiyal
9769316004


--- On Tue, 2/26/13, Binoy Soman <binoy.spp@DAELIM.CO.KR> wrote:

From: Binoy Soman <binoy.spp@DAELIM.CO.KR>
Subject: [MW:16879] PMI on Stainless Steel Welds
To: "materials-welding@googlegroups.com" <materials-welding@googlegroups.com>
Date: Tuesday, February 26, 2013, 11:40 PM

 

Dear Experts,

 

In a project, Is it always necessary  to do PMI on all Stainless welds or whether it is a clent requirement only. Code followed is ASME B 31.1

 

S.Binoy

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...