Hi!
My comments are given below
Regards
Prakash Hegde
08805593046
--- On Sat, 16/2/13, vineet kumar <vineet.rdb@gmail.com> wrote:
From: vineet kumar <vineet.rdb@gmail.com>
Subject: [MW:16779] SS-304L Cladding on Inner Dia. of Carbon Steel ring
To: materials-welding@googlegroups.com
Date: Saturday, 16 February, 2013, 10:50 AM
Dear Experts, I have to made SS-304L Cladding on Inner Dia. of Carbon Steel ring , below are the details: Base Metal - SA 516 Gr.70 ID-490 mm , Thk-150 mm Stainless Steel (304L)Cladding , thk- 5 mm finish Plz furnish my queries- 1) Method / process of Cladding. You can use GTAW or FCAW as per your availabilty of Automatic ID overlay facilty
2) Filler Wire/Electrode--E309LT1 for barrier +E308LT1 for subsequent layer if FCAW and ER309L +ER308L for GTAW process
3) Heat treatment--For CS Pipe PWHT at Soaking tmp of 600-620C for 1hr soaking time which willbe suitable up to 20Hrs soaking time Howevr you require to qualify PQR to decide the height at
undilted chemistry of 308L is achieved from base of overlay
Regards, Vineet Kumar 9971055188 -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit
https://groups.google.com/groups/opt_out.
No comments:
Post a Comment