Friday, February 15, 2013

Re: [MW:16783] Re: ACCOUSTIC EMISSION RODES

Dear Mr.Swamy,
We have some rods supposed to be of A350 LF2 N. At site, we noticed that there was no marking on them. Thé supplier said "NO supplier do thé same at that size"
Our client asked to prove that the material corresponds to what is mentioned in the MTC (A350 LF2 N). Accoringly we sent a sample for metallurgical analysis.
The resluts received has show less Manganese than required 0.51 against 0.6-1.35 in ASME
Please share how to proceed in order to settle that issue.
BR
 


 
2013/2/7 SV Swamy <svswamy@gmail.com>
What do you mean by Acoustic Emission rodes? Rods? What is their intended purpose? What was specified? Did you mean Metallic connectors or transducers (probes)? If your question is clear, we can give you better answers.

Swamy
Retired QA / NDT Expert
Hyderabad
India


On Wednesday, February 6, 2013 5:58:40 PM UTC+5:30, Mok wrote:
Dear Experts,
We got some rodes to be used for the Accoustic Emission purpose within an LPG's spheres project.
Our quality guy didn't get that there were no single marking on the same rodes, proving that these corresponds to the MTC received with.
In order to convince the End client, we sent a random coupon for metallurgical analysis to reproproduce the material Identification.
 
Now, the End client come back asking to do at least 10% sampling among the received rodes!
 
Can you propose an efficient way to convince based on the only one random test we did.
 
Appreciate your prompt response.
 
 
BR

MOKRANI Lassaad
Tunisia
00216 20 649 755
http://www.linkedin.com/pub/lassaad-mokrani/16/364/907


















P     Pensez environnement! N'imprimez ce mail que si c'est vraiment nécessaire
Please consider your environmental responsibility before printing this e-mail


This e-mail is confidential and it is intended only for the addressees. Any
review, dissemination, distribution, or copying of this message by persons
or entities other than the intended recipient is prohibited. If you have
received this e-mail in error, kindly notify us immediately by telephone or
e-mail and delete the message from your system. The sender does not accept
liability for any errors or omissions in the contents of this message which
may arise as a result of the e-mail transmission

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 



--
Meilleures salutations

MOKRANI Lassaad
Consultant Civil Engineer
Tunisia
00216 20 649 755
http://www.linkedin.com/pub/lassaad-mokrani/16/364/907


















P     Pensez environnement! N'imprimez ce mail que si c'est vraiment nécessaire
Please consider your environmental responsibility before printing this e-mail


This e-mail is confidential and it is intended only for the addressees. Any
review, dissemination, distribution, or copying of this message by persons
or entities other than the intended recipient is prohibited. If you have
received this e-mail in error, kindly notify us immediately by telephone or
e-mail and delete the message from your system. The sender does not accept
liability for any errors or omissions in the contents of this message which
may arise as a result of the e-mail transmission

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...