Re: [MW:16713] Replaceable Hardness Test in PQR?

Thank you very much for this, I was having big trouble with just hardness tests.

But could you refer to a standard so I can show this to our client. (In their face more accurately :)

Regards,
Tarik

On Sunday, February 3, 2013 8:25:08 AM UTC+5, Vino wrote:

Dear Tarik,

If you just want to do a specific hardness test which might be required by Client Specification/other international standard, this can be achieved by running the old PQR keeping all parameters intact and then send the coupon to Lab for hardness check. This test report can be added to your old PQR Report and is an acceptable practice.

Regards,

Vino-Doha 

On Sat, Feb 2, 2013 at 2:31 PM, Tarık Tuna <tari...@gmail.com> wrote:

Dear experts,

Can we change just a specific test report (lets assume Hardness Test) in PQR? By making another PQR just like the old one?

Thanks&Regards

--
To post to this group, send email to material...@googlegroups.com
To unsubscribe from this group, send email to materials-weld...@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-weld...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.