Dear David:
Tell your customer to check the characteristics of the SS-316.
For this alloy, it's normal to demonstrate magnetizing effects to some degree.
SS-316 "MUST" have some amount of ferrite (i.e. around 10%) other wise
it won't fit its purpose. There is Mo in this alloy, about 2% which
causes an austenite-ferrite structure with about 10% of ferrite in
austenite background.
In addition, durig welding all grains in weld and HAZ (including
ferrite grains) will be recrystalize almost in the same direction and
this is a good amplifier for the coherent magnetic fields of the alloy
which will resond to your customer's magnet.
Best Regards
Ramin Kondori
QC/Welding Engineer *
IWE AT 0070*
On 1/28/13, Chan, David <David.Chan@exterran.com> wrote:
> Hi Experts,
> We have an issue where the Customer is going around on the a stainless steel
> (S316L) using a potable to check on the materials and welds
>
> He has checked on some areas near the weldment where there is a force of
> attachment and the magnet is still sticking to the area
> The magnet drops off when the magnet is moving away from the weldment
>
> I request for a technical understanding to clarify with the customer
>
> Appreciate your kind assistance
>
> Thank you
> Best Regards
>
> David Chan
>
> Republic of Singapore
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>
>
>
--
*با تشكر*
* *
*رامين كندري*
واحد كنترل و تضمين كيفيت كارگاه ال ان جي كنگان
شركت نارديس انرژي
تلفن: 07727462189 داخلي 172 و171
فكس: 07727462179
همراه: 09132150320
آدرس: كنگان - سايت LNG - دفتر شركت نارديس
صندوق پستي 375 (اداره پست شهرستان كنگان)
*Regards*
*Ramin Kondori*
QA/QC Manager
IRAN-LNG Preoject
NARDIS ENERGY CO.
* *
*Tel.: +98-772-7462189 (Int.171, 172)*
*Fax: +98-772-7462179*
*Cell: +98-913-215-0320*
* Add.(Head office): No.27, 6th St., Seyed Jamalledin-e-Asad Abadi Ave.,
Tehran, Iran, 1431784891*
*Add.(Site): NARDIS Office, IRAN-LNG Plant, Kangan-Iran P.O.Box 375(Kangan
Post Office) *
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
Subscribe to:
Post Comments (Atom)
Re: [MW:34874] ASME IX, groove weld during WQT limits for Fillet Weld production
Hi David, There are two points in WQT. 1. Thickness of Base Metal -T 2. Thickness of Weld Metal -t When you use a combination of two proces...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment