Your project specifications/construction codes decide the length of pup piece.
ವಂದನೆಗಳೊಂದಿಗೆ / Best regards,
Nandesh Kumar A
Abu Dhabi, UAE
P.S. : Please don't print this e-mail unless you really need to.
--- On Sat, 2/2/13, Santosh Kumar Nayak <san2.nayak@gmail.com> wrote:
From: Santosh Kumar Nayak <san2.nayak@gmail.com>
Subject: [MW:16669] Minimum Puff piece in piping
To: materials-welding@googlegroups.com
Date: Saturday, 2 February, 2013, 7:35 AM
Dear Experts,
I have used 150mm of puff piece in the spool of 34'' pipe as per the drawing but my QA Dept. tells that in piping we can't use 150mm of puff piece and they have suggested me to use a minimum of puff piece of the OD of the pipe id i.e. a length of 850mm. Please give me the section on which the puff piece details is mentioned in the ASME section. With Regards,
SANTOSH KUMAR NAYAK
-- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit
https://groups.google.com/groups/opt_out.
No comments:
Post a Comment