Monday, February 25, 2013

[MW:16865] How filler wire & electrode selected for GTAW & SMAW

Dear Welding experts,

I like to know how we are selecting the filler wire and electrode for
Steel & Steel alloys.
Based on the tensile strength of the base material it is selected. I
need the specific technical parameters how we are selecting the filler
wire or electrode. Please guide me for the process,


GTAW SMAW
1. A240 TYPE 304 TO A240 TYPE 304L
2. A240 TYPE 304 TO A240 TYPE 316L
3. A240 TYPE 316L TO A240 TYPE 316L
4. A240 TYPE 321 TO A240 TYPE 304

Best regards,

V. Chandrasekaran

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...