Monday, February 11, 2013

[MW:16744] UC beam concavity

Dear sir,

 

please find attached photos for your reference,with raw material defects.This beams are UC 356*368*153 IN Section are  flange concavity 4 mm.Please confirm can anybody tell me whats an acceptance criteria for concavity AS per EN10034.We check in standard but it’s not clearly mentioned about acceptance limit.

 

current status : material under hold / clarification

 

waiting for your reply.

 

thanks & regards

 

dinesh

 

dubai

 

By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Re: [MW:34913] Filler wire

E71T-1C  is Charpy Impact tested at -20degC E71T-1CJ is Charpy impact tested at -40degC. AWS Classification for FCAW is only a supplementary...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...