Sunday, February 10, 2013

[MW:16734] RE: 16732] NORSOK

Dear Kaz,

 

1)      Latest revision of M-650 is revision 4 – 2011 which you can download for free on www.standard.no . This specification basically only applies to the qualification of manufacturers producing Duplex SS, High alloyed austenitic SS, Nickel based alloys and Titanium and its alloys. For non-standard products it can also be used for the qualification of other manufacturers, for example for the manufacturing of heavy or complex products.

2)      Manufacturer of materials according to Norsok M-630 (in which most of the materials are included you named under point 3) need to have a certified ISO 9001 certification and an assessment certificate for the specific materials they produce under this qualification. Certificate should mention material type and scope (thickness range / size etc.) This need to be reviewed / certified by a Notified Body for materials used in piping and/or pressure vessels produced for the European market.

3)      The Norsok standard for the materials is M-630, latest edition 2010, in which data sheets are included for all kind of materials including their requirements.

For A105 this is MDS C01 rev.4, for A350 LF2: MDS C11 rev.4, and for A182 F22: MDS X05 rev.2

Material A182 F11 is not included in table 1 of Norsok M-630 and therefore in my opinion can’t be used as a material in cases where Norsok is included in the project requirements.

 

Met vriendelijke groeten / Best Regards,

 

Herman Pieper

QA-QC Inspector / IWI-C Welding Inspector / IWT / Materials Expert

 

Job van der Havestraat 6

8384 DB, Wilhelminaoord

Cell: +31 6 51691215

 

Van: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] Namens Kaz Williams
Verzonden: zaterdag 9 februari 2013 20:26
Aan: materials-welding@googlegroups.com
Onderwerp: [MW:16732] NORSOK

 

Dear My Friends:

1.What is the last revision of NORSOK M-650,? actually I have Rev.3 2004. Is this the last rev?

2.is it correct to ask an international Inspection  company to evaluate  products of a producer to issue  NORSOK approval?  Can Inspection company issue NORSOK approval based on M-650?

3.what is the NORSOK std for approval  a  producer for A105 , A350LF2 , A182 F11,22 material?

 

Regards

KWS

 

--
To post to this group, send email to
materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...