D
-
Dear Hemant In your case It is of Tube sheet to shell joint (as per your sketch) Please refer QW 202.4 of ASME sec IX which is self explainatory and you can qualify PQR accordingly ( In your case it is P43 to P8 Regards Hegde P.B.
Regards
From: hemant <hsuthar@chemithon.co.in>
Subject: [MW:16585] WPS QUALIFICATION WITH CLADDING.
To: materials-welding@googlegroups.com
Cc: "Hardik Pandya" <hardik_real@yahoo.co.in>, pravin_576@yahoo.co.in
Date: Thursday, 24 January, 2013, 6:52 PM
Dear Sir, We going to tube to tube sheet joint with as below given material, our tube to joint is groove fillet weld as shown in sketch. I have to qualify WPS for SB 575 to 316L. we have only SB 575 50mm thick tube sheet material. And 316L plate. Can I qualify WPS with fillet weld? Or can I used 316L plate with ERNiCrMo4 cladding and 316L plate for plate to plate qualification. Pls reply. TUBE SHEET- ASTM SB 575, UNS N10276 SHELL-SA 312 TP 316L 
HEMANT SUTHAR QA/QC CEPL-SILVASSA 9712973092 -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. |
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment