Hi,
What you have found is a lack of quality problem from your side and you can not blame your sub contractor. In the view of solve this issue, you can do RT on the weld seams of each welder welded and you select the area to shoot RT and if the RT passed you can prepair the WQT/WPQ (welder qualification) as it is accept in code as a production weld, if passed the RT then the welder will be qualified. This is to solve your issue currently.
But this is not a proffesssioal approach as our group member noticed.
Thanks & Regards,
(Karthik)
Karthikeyan.S
QA/QC Manager
German-Thai Boiler Engineering Cooperation Limited.
Rayong Factory ;
379 Moo.6 Soi 8, Tambol Pananikom,
Nikompattana, Rayong 21180 THAILAND
Tel : +66 38 897 035-9 Ext. 137
Fax : +66 38 897 034
Hand Phone: 0066 892512282
From: sajeed zaheer <sajeed7674@gmail.com>
To: materials-welding@googlegroups.com
Sent: Wednesday, January 16, 2013 1:12 PM
Subject: [MW:16518] Fwd: welder qulification test or performance
To: materials-welding@googlegroups.com
Sent: Wednesday, January 16, 2013 1:12 PM
Subject: [MW:16518] Fwd: welder qulification test or performance
Dear experts,
for structural project the sub vendor has done welding with out qulified welders now this sub vendor is saying they will produce wqt with in one week with previous date.so my question is wheather it is accptable ,if it is acceptable please provide the refrence. awating for your reply.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment