Friday, November 30, 2012

Re: [MW:16091] Consumable for SA 387 GR-12.CL2 materials

Dear sir,

The base material is SA 387 GR12.CL2 it's conformed, we tried with E8018-B2 (ESAB), but the Radiographic reports shown on everywhere is Incomplete fusion, We follow proper Preheat, Interpass & we used the good welder for the joint.

Then only client informed us to use E7018-B2L electrode.

Please give me feed back the above issue.

Thanks to you.

Regards,
M.Sudalai.

On 30 November 2012 08:56, HAREESH K V <hareesh13h@gmail.com> wrote:
Dear Sir,

You can use E7018-B2L of E8018-B2L. Not got a good result? What happened, please explain.


Regards,

Hareesh K V
+8306703707

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
 
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
 
 

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...