Tuesday, November 20, 2012

Re: [MW:15993] Why T/R probe not used in heavy thickness job

dear Mr Ravi
it is reccomonded for welds and not for plates,
gar

On Tue, Nov 20, 2012 at 1:43 PM, Ravi Karuskar <rkaruskar@gmail.com> wrote:
> One of the reason is Backwall loss
>
> On Mon, Nov 19, 2012 at 11:04 PM, DK <dk_engg999@yahoo.co.in> wrote:
>>
>> Dear experts,
>>
>> plz. give me reply why T/R Probe not used instead of normal probe in
>> heavy thickness job.
>> what is the technical reason about using N Probe in heavy thick.
>>
>> Regards,
>>
>> DK
>>
>> --
>> To post to this group, send email to materials-welding@googlegroups.com
>> To unsubscribe from this group, send email to
>> materials-welding+unsubscribe@googlegroups.com
>> For more options, visit this group's bolg at
>> http://materials-welding.blogspot.com/
>>
>> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>>
>> The views expressed/exchnaged in this group are members personel views and
>> meant for educational purposes only, Users must take their own decisions
>> w.r.t. applicable code/standard/contract documents.
>>
>>
>
>
>
>
> --
> Ravi Karuskar
> Trelleborg Marine Systems India Pvt Ltd
> 801/A, Parshwanath E-Square,
> Corporate Road, Nr. Prahladnagar Garden,
> Satellite, Ahmedabad-380015.
> Gujarat, India.
> Mob. 9727802502
> Email : rkaruskar@gmail.com
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and
> meant for educational purposes only, Users must take their own decisions
> w.r.t. applicable code/standard/contract documents.
>
>

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm

The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...