Re: [MW:15933] WQT without WPS

Hello Srinu, The least you can do now is prepare WPS and PQR using production welding parameters, run mechanicals as required and hope all will come OK. We had one similar case when ASME AI allowed the same under what provisions I am still not sure. He picked one WPS we had closest to the case at hand and used welder qualifications based on P Nos. and F Nos. Best regards, Shashank Vagal --- On Wed, 14/11/12, srinu p <sree.dream6@gmail.com> wrote: From: srinu p <sree.dream6@gmail.com> Subject: [MW:15929] WQT without WPS To: materials-welding@googlegroups.com Date: Wednesday, 14 November, 2012, 3:35 PM Dear all,   My contractor doing welding without approved WPS. Now they are completed welding around 50 tanks (Under Ground Storage Tanks) out of 100 no.s.    Now the client is asking WPS, is there any way to solve this problem.   Regards  -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm   The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.