Saturday, November 10, 2012

Re: [MW:15894] Piping Welding Process.

2007 SECTION I
PART PW
REQUIREMENTS FOR BOILERS
FABRICATED BY WELDING
PW-9.2 Welding Grooves. The dimensions and shape
of the edges to be joined by butt welds shall be such as
to permit complete fusion and complete joint penetration.

On Sat, Nov 10, 2012 at 10:17 AM, Nandesh Kumar <nandeshkumar@rocketmail.com> wrote:
Dear Pak Pham Anh Khoa,

You may have to refer your "Project Welding (PW) Specifications", clause/note 9.2, I think.

Respectfully,

Nandesh Kumar A


--- On Sat, 10/11/12, Pak Pham Anh Khoa <pak2204@gmail.com> wrote:

From: Pak Pham Anh Khoa <pak2204@gmail.com>
Subject: [MW:15887] Piping Welding Process.
To: materials-welding@googlegroups.com
Date: Saturday, 10 November, 2012, 4:17 AM


Dear Experts,
Can you help me about process welding for piping?
I read a drawing. The drawing note: welding detail as per PW 9.2. I don't know where i can look-up  PW 9.2.
Can you explain it for me?
Thanks & Regards.
 Pak

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
 
 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
 
 



--
 



Regards

Muhammad Babur Khan Lashari
Mobile: +966   582774568
            +92 334 6186285




--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
 
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
 
 

No comments:

[MW:34820] RE: 34813] Clarification in Rate of heating and cooling.

Hello,   Please see the response below.   Regards.   P. Goswami, P. Eng, IWE.   From: materials-welding@googlegroups.com <materials-weld...