Sunday, September 9, 2012

Re: [MW:15250] Color Blindness

Yes. Colorblind people can also definitely pursue even ASNT level III.....except some specific color contrast related examinations. visit the forum at www.ndt.net for more details.

 
Respectfully,
Nandesh Kumar A

----- Original Message -----
> From: Selvanesan selvanesan.N <n.selvanesan@gmail.com>
> To: materials-welding@googlegroups.com
> Cc:
> Sent: Sunday, 9 September 2012 10:56 AM
> Subject: Re: [MW:15249] Color Blindness
>
> Dear Amit Vishwakarma
>
>
> AS PER ASNT-TC-1A THE NDT PERSONAL MUST QUALIFY EYE TEST
>
> 8.2 (2) Contrast Differentiation. The exami-
> nation should demonstrate the capability of
> distinguishing and differentiating contrast
> among colors used in the method. This
> should be conducted upon initial certifica-
> tion and at three-year intervals thereafter.
>
>
> BEST REGARDS
>
> N.SELVANESAN
>
>
> On 9/7/12, VishwakAmit <amitspvishwak@gmail.com> wrote:
>> Dear Experts
>>
>> I have strange doubt that whether color blindness person can do NDT
>> inspection or not but person practically facing no problem and
>> is it Mandatory requirement that NDT inspection shall be normal vision
>> person,,,,?
>> if Yes, then what extent he can do NDT inspection
>>
>> Regards
>> Amit Vishwakarma
>>
>> --
>> To post to this group, send email to materials-welding@googlegroups.com
>> To unsubscribe from this group, send email to
>> materials-welding+unsubscribe@googlegroups.com
>> For more options, visit this group's bolg at
>> http://materials-welding.blogspot.com/
>>
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>>
>> The views expressed/exchnaged in this group are members personel views and
>> meant for educational purposes only, Users must take their own decisions
>> w.r.t. applicable code/standard/contract documents.
>>
>>
>>
>
>
> --
> N.SELVANESAN
> 00971557112613
>
> --
> To post to this group, send email to materials-welding@googlegroups.com
> To unsubscribe from this group, send email to
> materials-welding+unsubscribe@googlegroups.com
> For more options, visit this group's bolg at
> http://materials-welding.blogspot.com/
> http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
>
> The views expressed/exchnaged in this group are members personel views and meant
> for educational purposes only, Users must take their own decisions w.r.t.
> applicable code/standard/contract documents.
>

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...