Dear Sevak
I don't know why you think so, but basically certificate type 3.2 can be use for both row materials and assembled products. Please have a look on part 4.2 of the EN 10204-2004. There mentioned that manufacturer can uses the test results in the 3.2 certificate of his row material directly (without any new test) in the 3.2 certificate of his product.
Regards
On Wed, Jul 18, 2012 at 9:05 AM, sevak hiren <hirensevak80@gmail.com> wrote:
Dear Experts,EN 10204 Type 3.2 Certificate is applicable to non-metalic & metalic products like plates, sheets, bars, forgings, castings etc. (Applicable to raw material products only)So, this type of certificate can not be issued for complete assembled products like Valve, Pump, any machine etc.Please let me know your views.--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
M. Shokri Arfaei
International Welding Engineer (IWE)
ASNT NDT Level III
ERI Metallurgy Lab. Manager
Tel: +98-21-66282127
Fax: +98-21-66282779
Please don't print this e-mail unless you really need to. BeGreen!
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment