Sunday, July 8, 2012

Re: [MW:14803] Filler Materail required for welding SS 321 to SA 516 gr-70

Hi

It depends on working temperature of your equipment, If temperature is above 315°C you have to use ER309L as a buttering pass and ER321 for filling passes, you can use welding handbook(dissimilar welding section) and API 582 as a reference.

Regards,
Himan

 


On Sat, Jul 7, 2012 at 8:30 PM, <osikwemhepaul@gmail.com> wrote:
Hello Ankit
Use ER309L

Sent from my iPad

On 07 Jul 2012, at 1:20 PM, "Ankit Patel" <ankit.patel@orientalindia.net> wrote:

Dear Experts,

 

I want to weld SA 516 GR-70 plate to SA 182 TP 321.

 

Kindly suggest me the filler material grade used  for welding this material.

 

Thanks & Regards

Ankit Patel
Engineer Quality

 

<image001.jpg>

 

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:34832] Inquiry about Single Bevel with Back Grinding

Dear Uday, As per your question that one is called with backing only,Simple both side you are welding it is backing with strip or without st...