Dear Mr. Manpreet Singh Many thanks for your response… Actually, I am working as a consultant engineer in crude oil tank construction project in the south of Iraq. They ask me to design ICCP system for tanks and underground pipe. Up to my information connecting of silicon iron electrodes to the tank body was known. The problem is how to connect electrode cable to the underground pipe, I think they used a special procedure to do that…..So, would you please help me with an information about the standard method or any other method…. Accept my profound regards… Dr. Eng. Alaa A. Atiyah
--- On Fri, 7/6/12, manpreet <manpreetsin88@rediffmail.com> wrote:
From: manpreet <manpreetsin88@rediffmail.com>
Subject: Re: [MW:14789] Connecting of ICCP electrodes to the oil pipe
To: materials-welding@googlegroups.com
Date: Friday, July 6, 2012, 11:20 PM
Hi, Would you please describe the problem, Regards, Manpreet Singh On Sat, 07 Jul 2012 11:24:22 +0530 wrote > > > Dear Experts I have a problem during the connecting of Deepwell electrode cable to the oilpipe structure in one of the sites at the south of Iraq. The technical facilities there is limited. Would you please share your technical information with me. Regards, Dr. Eng. Alaa A. Atiyah -- > To post to this group, send email to materials-welding@googlegroups.com > To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com > For more options, visit this group's bolg at http://materials-welding.blogspot.com/ > The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. > -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment