Saturday, July 7, 2012

Re: [MW:14786] what is the proper filler metal for 0Cr19Ni10NbN

Depending on the service, you might consider E/ER630.

Sent from my BlackBerry® wireless device
From: Roy Liu <standardliu@hotmail.com>
Sender: materials-welding@googlegroups.com
Date: Fri, 6 Jul 2012 15:07:42 +0800
To: <materials-welding@googlegroups.com>
ReplyTo: materials-welding@googlegroups.com
Subject: [MW:14781] what is the proper filler metal for 0Cr19Ni10NbN

hi,all
could any one suggest me that which welding rod is right for the base metal
0Cr19Ni10NbN?
the regular ER347 can not meet the Tensile strength requirement.
 
 
Roy
By -

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

[MW:34866] Presentation for WPS ,PQR AND WPQ as per ASME Sec IX in power point

Dear Experts.        If anyone having presentation of WPS,PQR and WPQ  as per ASME  SEC.IX  in power point then please share . Regards Sanja...

  • Materails FAQs
    Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
  • RE: [MW:5585] Buttering of weld joints
    Definition of buttering from ASME Section IX, QW/QB-492 Definitions:   Buttering:  the addition of material, by welding, on one or bot...
  • WELD AND WELDING SYMBOLS
    Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...